Upload 4 files

camera_mount_install.md

@@ -0,0 +1,13 @@
+# Overview
+This is the overview of the final camera setup:
+![over view of the camera mount](overview_camera_mount.png)
+
+
+# Step-by-step installation instruction
+Please refer to the following instructions; each item corresponds to the numbered points shown in the figure above.
+
+1. 550mm 1640Q aluminum extrusion profile should be installed tightly beneath the original camera mount of the Agilex Aloha platform
+2. The 3D-printed component should be mounted on top of the 550 mm 1640Q profile.
+3. Then, the camera should be mounted on top of the 3D-printed component.
+4. The camera angle should be ajusted as shown in this figure ![the camera angle](camera_angle.png). You can precisely adjust it by ensuring that the bottom edge of the camera’s field of view includes a small portion of the Agilex Aloha platform, as illustrated here 
+![the main view](the_main_view.png) or according to our data.